Default configuration, Command mode, User guidelines – Dell POWEREDGE M1000E User Manual
Page 590: Example
590
Port Channel Commands
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example shows statistics about port-channel 1.
console#show statistics port-channel 1
Total Packets Received (Octets)................ 0
Packets Received > 1522 Octets................. 0
Packets RX and TX 64 Octets.................... 1064
Packets RX and TX 65-127 Octets................ 140
Packets RX and TX 128-255 Octets............... 201
Packets RX and TX 256-511 Octets............... 418
Packets RX and TX 512-1023 Octets.............. 1
Packets RX and TX 1024-1518 Octets............. 0
Packets RX and TX 1519-1522 Octets............. 0
Packets RX and TX 1523-2047 Octets............. 0
Packets RX and TX 2048-4095 Octets............. 0
Packets RX and TX 4096-9216 Octets............. 0
Total Packets Received Without Errors.......... 0
Unicast Packets Received....................... 0
Multicast Packets Received..................... 0
Broadcast Packets Received..................... 0
2CSPC4.XModular-SWUM200.book Page 590 Thursday, March 10, 2011 11:18 AM