Dell POWEREDGE M1000E - Manual (Page 1506)

1502 SSH Commands
Command Mode
Global Configuration mode
User Guidelines
DSA keys are generated in pairs: one public DSA key and one private DSA
key. If your switch already has DSA keys when you issue this command, you
are warned and prompted to replace the existing keys. The keys are not saved
in the switch configuration; they are saved in the file system and the private
key is never displayed to the user. DSA keys, along with other switch
credentials, are distributed to all units in a stack on a configuration save.
Example
The following example generates DSA key pairs.
console(config)#crypto key generate dsa
crypto key generate rsa
Use the crypto key generate rsa command in Global Configuration mode to
generate RSA key pairs. Use the no form of the command to delete the key
from the local file system.
Syntax
crypto key generate rsa
no crypto key generate rsa
Default Configuration
RSA key pairs do not exist.
Command Mode
Global Configuration mode
User Guidelines
RSA keys are generated in pairs: one public RSA key and one private RSA key.
If your switch already has RSA keys when you issue this command, you are
warned and prompted to replace the existing keys. The keys are not saved in
2CSPC4.XModular-SWUM200.book Page 1502 Thursday, March 10, 2011 11:18 AM