Dell POWEREDGE M1000E - Manual (Page 171)

Using the CLI 171
Port Channel Interfaces
Port-channel (or LAG) interfaces are represented in the CLI by the variable
port-channel-number ., which can can assume values from 1-48.
When listed in command line output, port channel interfaces are preceded by
the characters Po, as shown in the preceding example:
Loopback Interfaces
Loopback interfaces are represented in the CLI by the variable loopback-id ,
which can assume values from 0–7.
VLAN Interfaces
VLAN interfaces are represented in the CLI by the variable vlan-id , which
can can assume values from 1-4093.
Tunnel Interfaces
VLAN interfaces are represented in the CLI by the variable tunnel-id , which
can can assume values from 0–7.
Examples
Example #1
gigabitethernet 1/0/1
gigabitethernet1/0/1 (there is no space)
gi 1/0/1
gi1/0/1 (there is no space)
port-channel 1
vl 5
Example #2
console#show vlan
VLAN Name Ports Type
----- --------------- ------------- --------------
2CSPC4.XModular-SWUM200.book Page 171 Thursday, March 10, 2011 11:18 AM