Dell POWEREDGE M1000E - Manual (Page 1509)

SSH Commands 1505
ip ssh pubkey-auth
Use the ip ssh pubkey-auth command in Global Configuration mode to
enable public key authentication for incoming SSH sessions. To disable this
function, use the no form of this command.
Syntax
ip ssh pubkey-auth
no ip ssh pubkey-auth
Default Configuration
The function is disabled.
Command Mode
Global Configuration mode
User Guidelines
AAA authentication is independent from this configuration.
Example
The following example enables public key authentication for incoming SSH
sessions.
console(config)#ip ssh pubkey-auth
ip ssh server
Use the ip ssh server command in Global Configuration mode to enable the
switch to be configured from SSH. To disable this function, use the no form
of this command.
Syntax
ip ssh server
no ip ssh server
2CSPC4.XModular-SWUM200.book Page 1505 Thursday, March 10, 2011 11:18 AM