Command mode, User guidelines, Example – Dell POWEREDGE M1000E User Manual

Page 999

Advertising
background image

IPv6 Routing Commands

999

Command Mode

Privileged EXEC

User Guidelines

The following parameters are displayed by this command:

Example

console#show ipv6 igmp-proxy groups

Interface................................ vlan 10

Group Address Last Reporter Up Time Member State Filter Mode
Sources

------------- ---------------- --------- ----------------- ------------- ---
----

FF1E::1 FE80::100:2.3 244 DELAY_MEMBER Exclude 2

Field

Description

Interface

The interface number of the MLD-Proxy.

Group Address

The IP address of the multicast group.

Last Reporter

The IP address of the host that last sent a membership report for

the current group on the network attached to the MLD Proxy

interface (upstream interface).

Up Time (in

secs)

The time elapsed in seconds since last created.

Member State

Possible values are:

• Idle_Member—The interface has responded to the latest group

membership query for this group.

• Delay_Member—The interface is going to send a group

membership report to respond to a group membership query for

this group.

Filter Mode

Possible values are Include or Exclude.

Sources

The number of sources attached to the multicast group.

Group Source

List

The list of IP addresses of the sources attached to the multicast

group.

Expiry Time

The time left for a source to get deleted.

2CSPC4.XModular-SWUM200.book Page 999 Thursday, March 10, 2011 11:18 AM

Advertising