Show cut-through mode, Syntax, Command mode – Dell POWEREDGE M1000E User Manual
Page 1560: Default configuration, User guidelines, Example, Show interfaces advanced firmware, Parameter description, Show cut-through, Mode
1556
System Management Commands
show cut-through mode
Use the show cut-through mode command to show the cut-through mode on
the switch.
Syntax
show cut-through mode
Command Mode
Privileged EXEC
Default Configuration
This command has no default configuration.
User Guidelines
No specific guidelines.
Example
Console#show cut-through mode
Current mode
: Enable
Configured mode : Disable (This mode is effective on
next reload)
show interfaces advanced firmware
Use the show interfaces advanced firmware command to display the firmware
revision of the PHY for a port.
Syntax
show interfaces advanced firmware
interface
Parameter Description
Parameter
Description
interface
A 10G non-stacking physical interface.
2CSPC4.XModular-SWUM200.book Page 1556 Thursday, March 10, 2011 11:18 AM