Dell POWEREDGE M1000E - Manual (Page 1550)

1546 System Management Commands
Syntax
motd-banner
no motd-banner
• MESSAGE — Quoted text
Default Configuration
This command has no default configuration.
Command Mode
Line Configuration
User Guidelines
This command has no user guidelines.
Example
console(config-telnet)# motd-banner
movemanagement
Use the movemanagement command in Stack Global Configuration mode to
move the Management Switch functionality from one switch to another.
Syntax
movemanagement fromunit tounit
• fromunit — The switch identifier on the current Management Switch.
• tounit — The switch identifier on the new Management Switch.
Default Configuration
This command has no default configuration.
Command Mode
Stack Global Configuration mode
2CSPC4.XModular-SWUM200.book Page 1546 Thursday, March 10, 2011 11:18 AM