User group, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual
Page 1295: Command mode
Captive Portal Commands
1293
1 user123 14400
1
Default
2 user234 0
1
Default
2
group2
console#show captive-portal user 1
User ID........................................ 1
User Name...................................... user123
Password Configured............................ Yes
Session Timeout................................ 0
Group ID Group Name
-------- --------------------------------
1 Default
2 group2
user group
Use the user group command to associate a group with a captive portal user.
Use the “no” form of this command to disassociate a group and user. A user
must be associated with at least one group so the last group cannot be
disassociated.
Syntax
user
user-id
group
group-id
•
user-id
—User ID (Range: 1–128).
•
group-id
—Group ID (Range: 1–10).
Default Configuration
A user is associated with group 1 by default.
Command Mode
Captive Portal Configuration mode.
2CSPC4.XModular-SWUM200.book Page 1293 Thursday, March 10, 2011 11:18 AM