Dell POWEREDGE M1000E - Manual (Page 618)

618 QoS Commands
Default Configuration
This command has no default configuration.
Command Mode
Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays adding a match condition using the specified
IP address and bit mask.
console(config-classmap)#match dstip 10.240.1.1
10.240.0.0
match dstip6
The match dstip6 command adds to the specified class definition a match
condition based on the destination IPv6 address of a packet.
Syntax
match dstip6 destination-ipv6-prefix/prefix-length
• destination-ipv6-prefix —IPv6 prefix in IPv6 global address format.
• prefix-length —IPv6 prefix length value.
Default Configuration
There is no default configuration for this command.
Command Mode
Ipv6-Class-Map Configuration mode.
User Guidelines
There are no user guidelines for this command.
2CSPC4.XModular-SWUM200.book Page 618 Thursday, March 10, 2011 11:18 AM