Show radius statistics, Syntax – Dell POWEREDGE M1000E User Manual
Page 670
670
RADIUS Commands
Source IP : 0.0.0.0
RADIUS Attribute 4 Mode : Disable
RADIUS Attribute 4 Value : 0.0.0.0
console#show radius-servers accounting name
Server Name
Host Address
Port Type
---------------------- -------------- ------ ----------
Default-RADIUS-Server
2.2.2.2
1813 Secondary
console#show radius-servers name Default-RADIUS-Server
RADIUS Server Name.......................... Default-RADIUS-Server
Current Server IP Address................... 1.1.1.1
Retransmits................................. 4
Timeout..................................... 5
Deadtime.................................... 0
Port........................................ 1812
Source IP................................... 0.0.0.0
Secret Configured........................... No
Message Authenticator....................... Enable
show radius statistics
Use the show radius statistics command to show the statistics for an
authentication or accounting server.
Syntax
show radius statistics [accounting | authentication ] [{
ipaddress
|
hostname
| name
servername
}]
2CSPC4.XModular-SWUM200.book Page 670 Thursday, March 10, 2011 11:18 AM