Dell POWEREDGE M1000E - Manual (Page 1062)

1062 IPv6 Multicast Commands
Neighbor Address...............................
FE80::200:FF:FE00:33
Up Time (hh:mm:ss).............................
00:00:12
Expiry Time (hh:mm:ss).........................
00:01:34
DR Priority.................................... 0
show ipv6 pimsm rphash
Use the show ipv6 pimsm rphash command to display which rendezvous
point (RP) is being selected for a specified group.
Syntax
show ipv6 pimsm rphash group-address
group-address —Group IP address supported by RP.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#show ipv6 pimsm rphash ff1e::/64
RP Type
Address
------------------------ -----
2CSPC4.XModular-SWUM200.book Page 1062 Thursday, March 10, 2011 11:18 AM