Freescale Semiconductor MPC8260 - Manual (Page 203)

System Interface Unit (SIU)
MPC8260 PowerQUICC II Family Reference Manual, Rev. 2
Freescale Semiconductor 4-31
PPC_ALRL, shown in Figure 4-24 , defines arbitration priority of 60x bus masters 8–15. Priority field 0 is
the highest-priority arbitration level. For information about the PowerQUICC II bus master indexes, see
the description of PPC_ACR[PRKM] in
Table 4-10 .
4.3.2.4 Local Bus Arbiter Configuration Register (LCL_ACR)
The local bus arbiter configuration register (LCL_ACR), shown in Figure 4-25 , defines the arbiter modes
and the parked master on the local bus.
Table 4-11 describes LCL_ACR register bits.
0 3 4 7 8 11 12 15
Field Priority Field 8 Priority Field 9 Priority Field 10 Priority Field 11
Reset 1000 1001 1010 1011
R/W R/W
Addr 0x0x10030
16 19 20 23 24 27 28 31
Field Priority Field 12 Priority Field 13 Priority Field 14 Priority Field 15
Reset 1100 1101 1110 1111
R/W R/W
Addr 0x10032
Figure 4-24. PPC_ALRL
0 1 2 3 4 7
Field — DBGD — PRKM
Reset 0000_0010
R/W R/W
Addr 0x0x10034
Figure 4-25. LCL_ACR
Table 4-11. LCL_ACR Field Descriptions
Bits Name Description
0–1 — Reserved, should be cleared.
2 DBGD Data bus grant delay. Specifies the minimum number of data tenure wait states for PowerPC
master-initiated data operations. This is the minimum delay between TS and DBG.
0 DBG is asserted with TS if the data bus is free.
1 DBG is asserted one cycle after TS if the data bus is not busy.
See
Section 8.5.1, “Data Bus Arbitration.”
3 — Reserved, should be cleared.