Renesas SH7781 - Manual (Page 1201)

24. Multimedia Card Interface (MMCIF)
Rev.1.00 Jan. 10, 2008 Page 1171 of 1658
REJ09B0261-0100
Section 24 Multimedia Card Interface (MMCIF)
This LSI supports a multimedia card interface (MMCIF). The MMC mode interface can be
utilized. The MMCIF is a clock-synchronous serial interface that transmits/receives data that is
distinguished in terms of command and response. A number of commands/responses are
predefined in the multimedia card. As the MMCIF specifies a command code and command
type/response type upon the issuance of a command, commands extended by the secure
multimedia card (Secure-MMC) and additional commands can be supported in the future within
the range of combinations of currently defined command types/response types.
24.1 Features
The MMCIF has the following features:
• Supports a subset of the MultiMediaCard System Specification Version 3.1
• Supports MMC mode
• Incorporates 64 data-transfer FIFOs of 16 bits
• Supports DMA transfer
• Four interrupt sources
FIFO empty/full (FSTAT), command/response/data transfer complete (TRAN), transfer error
(ERR), and FIFO ready (FRDY)
• Interface via the MMCCLK output (transfer clock output) pin, the MMCCMD input/output
(command output/response input) pin, and the MMCDAT input/output (data input/output) pin