Renesas SH7781 - Manual (Page 193)

7. Memory Management Unit (MMU)
Rev.1.00 Jan. 10, 2008 Page 163 of 1658
REJ09B0261-0100
Bit Bit Name
Initial
Value R/W
Description
3 R1 0 R/W Re-Fetch Inhibit 1 after Register Change
When a register allocated in addresses H'FF200000 to
H'FF2FFFFF is changed, this bit controls whether re-
fetch is performed for the next instruction.
0: Re-fetch is performed
1: Re-fetch is not performed
2 LT 0 R/W Re-Fetch Inhibit after LDTLB Execution
This bit controls whether re-fetch is performed for the
next instruction after the LDTLB instruction has been
executed.
0: Re-fetch is performed
1: Re-fetch is not performed
1 MT 0 R/W Re-Fetch Inhibit after Writing Memory-Mapped TLB
This bit controls whether re-fetch is performed for the
next instruction after writing memory-mapped
ITLB/UTLB while the AT bit in MMUCR is set to 1.
0: Re-fetch is performed
1: Re-fetch is not performed
0 MC 0 R/W Re-Fetch Inhibit after Writing Memory-Mapped IC
This bit controls whether re-fetch is performed for the
next instruction after writing memory-mapped IC while
the ICE bit in CCR is set to 1.
0: Re-fetch is performed
1: Re-fetch is not performed