Renesas SH7781 - Manual (Page 877)

19. Display Unit (DU)
Rev.1.00 Jan. 10, 2008 Page 847 of 1658
REJ09B0261-0100
Bit Bit Name
Initial
Value R/W Internal
Update Description
14, 13 CDEM 00 R/W * CDE Output Mode
00: CDE signal is output without change
01: CDE signal is output without change
10: Low level output outside of display interval
(interval when DISP signal is inactive)
11: High level output outside of display interval
(interval when DISP signal is inactive)
12 CDED 0 R/W * CDE Disable
0: CDE signal is output
1: CDE signal is not output (fixed to low level)
11 to 9
⎯ All
0 R
⎯ Reserved
These bits are always read as 0. The write value
should always be 0.
8 ODEV 0 R/W * ODD Even Select for ODDF Signal
0: In interlaced display of the same frame, when
the ODDF pin is at low level the first half of
the field is displayed.
1: In interlaced display of the same frame, when
the ODDF pin is at high level the first half of
the field is displayed.