Renesas SH7781 - Manual (Page 1215)

24. Multimedia Card Interface (MMCIF)
Rev.1.00 Jan. 10, 2008 Page 1185 of 1658
REJ09B0261-0100
(2) INTCR1
Bit:
Initial value:
R/W:
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0
R/W
INTR
Q2E
INTR
Q1E
INTR
Q0E
CRCE
RIE
DTE
RIE
CTE
RIE
R/W R/W R R R/W R/W R/W
⎯ ⎯
Bit Bit Name
Initial
Value R/W Description
7 INTRQ2E 0 R/W ERR Interrupt Enable
0: Disables ERR interrupt.
1: Enables ERR interrupt.
6 INTRQ1E 0 R/W TRAN Interrupt Enable
0: Disables TRAN interrupt.
1: Enables TRAN interrupt.
5 INTRQ0E 0 R/W FSTAT Interrupt Enable
0: Disables FSTAT interrupt.
1: Enables FSTAT interrupt.
4, 3 — All 0 R Reserved
These bits are always read as 0. The write value should
always be 0.
2 CRCERIE 0 R/W CRC Error Interrupt Flag Setting Enable
0: Disables CRC error interrupt (disables CRCERI flag
setting).
1: Enables CRC error interrupt (enables CRCERI flag
setting).
1 DTERIE 0 R/W Data Timeout Error Interrupt Flag Setting Enable
0: Disables data timeout error interrupt (disables DTERI
flag setting).
1: Enables data timeout error interrupt (enables DTERI
flag setting).
0 CTERIE 0 R/W Command Timeout Error Interrupt Flag Setting Enable
0: Disables command timeout error interrupt (disables
CTERI flag setting).
1: Enables command timeout error interrupt (enables
CTERI flag setting).