Renesas SH7781 - Manual (Page 1471)

28. General Purpose I/O Ports (GPIO)
Rev.1.00 Jan. 10, 2008 Page 1441 of 1658
REJ09B0261-0100
28.2.40 Input-Pin Pull-Up Control Register 1 (PPUPR1)
PPUPR1 is a 16-bit readable/writable register that performs the pull-up control for the pin
corresponding to each bit of the register field.
0 1 2 3 4 5 6 7 8 9 10 11 12 13 15 14
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
— —
RDY
PUP
— — — — — — — — — — — — —
R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
Bit:
Initial value:
R/W:
Bit Bit Name
Initial
value R/W Description
15 to 3 — All 1 R/W Reserved
These bits are always read as 1, and the write value
should always be 1.
2 RDYPUP 1 R/W Controls pull-up of the
RDY pin
0:
RDY pull-up off
1:
RDY pull-up on
1 and 0 — All 1 R/W Reserved
These bits are always read as 1, and the write value
should always be 1.
28.2.41 Input-Pin Pull-Up Control Register 2 (PPUPR2)
PPUPR2 is a 16-bit readable/writable register that performs the pull-up control for the pin
corresponding to each bit of the register field.
0 1 2 3 4 5 6 7 8 9 10 11 12 13 15 14
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
IRL2
PUP IRL3
PUP IRL0
PUP IRL1
PUP
— — —
SIOF
UP1
—
NMI
PUP
CLK
PUP
SIOF
UP0
— — — —
R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
Bit:
Initial value:
R/W: