Renesas SH7781 - Manual (Page 207)

7. Memory Management Unit (MMU)
Rev.1.00 Jan. 10, 2008 Page 177 of 1658
REJ09B0261-0100
7.5 MMU Functions
7.5.1 MMU Hardware Management
This LSI supports the following MMU functions.
1. The MMU decodes the virtual address to be accessed by software, and performs address
translation by controlling the UTLB/ITLB in accordance with the MMUCR settings.
2. The MMU determines the cache access status on the basis of the page management
information read during address translation (C and WT bits).
3. If address translation cannot be performed normally in a data access or instruction access, the
MMU notifies software by means of an MMU exception.
4. If address translation information is not recorded in the ITLB in an instruction access, the
MMU searches the UTLB. If the necessary address translation information is recorded in the
UTLB, the MMU copies this information into the ITLB in accordance with the LRUI bit
setting in MMUCR.
7.5.2 MMU Software Management
Software processing for the MMU consists of the following:
1. Setting of MMU-related registers. Some registers are also partially updated by hardware
automatically.
2. Recording, deletion, and reading of TLB entries. There are two methods of recording UTLB
entries: by using the LDTLB instruction, or by writing directly to the memory-mapped UTLB.
ITLB entries can only be recorded by writing directly to the memory-mapped ITLB. Deleting
or reading UTLB/ITLB entries is enabled by accessing the memory-mapped UTLB/ITLB.
3. MMU exception handling. When an MMU exception occurs, processing is performed based on
information set by hardware.