H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 113)

92
Item Description
If a file with the same name already exists,
overwrite it without any prompt
Specify whether to overwrite the file with the same name.
If you do not select the option, when you rename a file with the
same name, the system prompts "The file has existed.", and
you cannot upgrade the software.
Reboot after the upgrade is finished.
Specify whether to reboot the device to make the upgraded
software take effect after the application file is uploaded.
Rebooting the device
CAUTION:
Before rebooting the device, save the configuration. Otherwise, all unsaved configurations are lost after
device reboot.
1. Select Device > Device Maintenance from the navigation tree.
2. Click the Reboot tab.
The reboot tab page appears.
Figure 52 Device reboot page
3. Clear the box before "Check whether the current configuration is saved in the next startup
configuration file" or keep it selected.
4. Click Apply.
A confirmation dialog box appears.
5. Click OK.
If you select the box next to Check whether the current configuration is saved in the next startup
configuration file, the system checks the configuration before rebooting the device. If the check
succeeds, the system reboots the device. If the check fails, the system displays a dialog box to
inform you that the current configuration and the saved configuration are inconsistent, and does
not reboot the device. You must save the current configuration manually before you can reboot
the device.
If you do not select the box next to Check whether the current configuration is saved in the next
startup configuration file, the system reboots the device automatically.
6. Log in again in to the Web interface after the device reboots.