H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 406)

385
Figure 376 Configuring security settings
4. Enable wireless service:
a. Select Wireless Service > Access Service from the navigation tree.
b. Select the mac-auth box.
c. Click Enable.
Figure 377 Enabling wireless service
5. Configure a MAC authentication list:
a. Select Wireless Service > Access Service from the navigation tree.
b. Click MAC Authentication List.
c. On the page that appears, add a local user in the MAC Address field. 0014-6c8a-43ff is used
in this example.
d. Click Add.