Configuring the ac – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 592
Advertising
571
Figure 595 Adding a user account for device management
Configuring the AC
1.
Configure RADIUS scheme system:
a.
From the navigation tree, select Authentication > RADIUS.
b.
Click Add.
c.
Enter the scheme name system, select the server type Extended, and select the username format
With domain name.
d.
In the RADIUS Server Configuration area, click Add to enter the RADIUS server configuration
page.
e.
Select the server type Primary Authentication, enter 10.1.1.1 as the IP address of the primary
authentication server, 1812 as the port number, and expert as the key, and click Apply to add
the primary authentication server to the scheme.
Advertising
This manual is related to the following products: