H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 138)

117
Figure 74 Modifying a Layer 3 physical interface
3. Modify the information about the Layer 3 interface.
The configuration items of modifying the Layer 3 interface are similar to those for creating an
interface.
Table 46 describes configuration items that apply to modifying a Layer 3 interface.
4. Click Apply.
Table 46 Configuration items
Item Description
Interface Type Set the interface type, which can be Electrical port, Optical port, or None.
Interface Status
Display and set the interface status.
• Connected indicates that the current status of the interface is up and connected.
You can click Disable to shut down the interface.
• Not connected indicates that the current status of the interface is up but not
connected. You can click Disable to shut down the interface.
• Administratively Down indicates that the interface is shut down by the
administrator. You can click Enable to bring up the interface.
After you click Enable or Disable, the page displaying interface information appears.
IMPORTANT:
For an interface whose status cannot be changed, the Enable or Disable button is not
available.
Working Mode Set the interface to work in bridge mode or router mode.