H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 169
Advertising
148
Figure 112 Creating an SNMP user
5.
Enable the agent to send SNMP traps:
a.
Click the Trap tab
The page in
appears.
b.
Select the Enable SNMP Trap box.
c.
Click Apply.
Figure 113 Enabling the agent to send SNMP traps
6.
Add target hosts of SNMP traps:
a.
Click Add on the Trap tab.
The page in
appears.
Advertising
This manual is related to the following products: