H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 155)

134
Figure 89 Creating an SNMP view (1)
4. Enter the view name.
5. Click Apply.
The page in
Figure 90 appears.
Figure 90 Creating an SNMP view (2)
6. Configure the parameters as described in Table 54 .
7. Click Add.
8. Repeat steps 6 and 7 to add more rules for the SNMP view.
9. Click Apply.
To cancel the view, click Cancel.
Table 54 Configuration items
Item Description
View Name Set the SNMP view name.
Rule
Select to exclude or include the objects in the view range
determined by the MIB subtree OID and subtree mask.
MIB Subtree OID
Set the MIB subtree OID (such as 1.4.5.3.1) or name (such as
system).
MIB subtree OID identifies the position of a node in the MIB
tree, and it can uniquely identify a MIB subtree.
Subtree Mask
Set the subtree mask.
If no subtree mask is specified, the default subtree mask (all Fs)
will be used for mask-OID matching.