H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 408)

387
Figure 380 Enabling 802.11n(2.4GHz) radio
Configuring the client
1. Launch the client, and refresh the network list.
2. Select the configured service in Choose a wireless network (mac-auth in this example).
3. Click Connect.
Figure 381 Configuring the client
Verifying the configuration
• The client can successfully associate with the AP and access the WLAN.
• You can view the online clients on the page you enter by selecting Summary > Client.
Remote MAC authentication configuration example
Network requirements
As shown in Figure 103 , perform remote MAC authentication on the client.