H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 579)

558
b. Click Add.
c. Enter telnet as the username.
d. Enter abcd as the password.
e. Enter abcd again to confirm the password.
f. Select Reversible for password encryption.
g. Select Common User as the user type.
h. Select Configure as the level.
i. Select Telnet as the service type.
j. Click Apply.
Figure 585 Configuring the local user
2. Configure ISP domain test:
a. From the navigation tree, select Authentication > AAA.
The Domain Setup page appears, as shown in
Figure 307 .
b. Enter test as the domain name.
c. Click Apply.