H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 189)

168
Figure 134 Displaying ARP entries
Creating a static ARP entry
1. From the navigation tree, select Network > ARP Management.
The default ARP Table page appears, as shown in
Figure 134 .
2. Click Add .
The New Static ARP Entry page appears.
Figure 135 Adding a static ARP entry
3. Configure the static ARP entry, as described in Table 64 .
4. Click Apply.
Table 64 Configuration items
Item Description
IP Address Enter an IP address for the static ARP entry.
MAC Address Enter a MAC address for the static ARP entry.