H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 225)

204
Figure 171 Configuring a DHCP server interface
Displaying information about assigned IP addresses
1. From the navigation tree, select Network > DHCP > DHCP Server to enter the page, as shown
in Figure 168 .
2. In the Addresses In Use field on the lowest part of the page, click Addresses In Use to view
information about the IP address assigned from the address pool.
Figure 172 Displaying addresses in use
Table 77 Field description
Field Description
IP Address Assigned IP address.
Client MAC Address/Client ID Client MAC address or client ID bound to the IP address.
Pool Name Name of the DHCP address pool where the IP address belongs.
Lease Expiration Lease time of the IP address.
Recommended configuration procedure (for DHCP
relay agent)
Step Remarks
1. Enabling DHCP and configuring
advanced parameters for the
DHCP relay agent
Required.
Enable DHCP globally and configure advanced DHCP parameters.
By default, global DHCP is disabled.