Verifying the configuration, Wireless sniffer configuration example, Network requirements – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 813
Advertising
792
Figure 830 Enabling wireless location
Verifying the configuration
You can display the location information of the rogue AP, APs, and clients by using maps, forms or
reports.
Wireless sniffer configuration example
Network requirements
As shown in
, configure a Capture AP, and enable wireless sniffer on this AP to capture
wireless packets. The captured packets are then saved in a .dmp file for troubleshooting.
Advertising
This manual is related to the following products: