Configuring the ac – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 436
415
Figure 428 Network diagram
Adding commands to the configuration file of the AP
port-security enable
domain branch.net
authentication lan-access local
authorization lan-access local
accounting lan-access local
local-user 00-14-6c-8a-43-ff
password simple 00-14-6c-8a-43-ff
service-type lan-access
mac-authentication user-name-format mac-address with-hyphen lowercase
Then save the configuration file with the name map.cfg, and upload it to the storage media of the AC.
Configuring the AC
Before configuring the AC in the Web interface, use the mac-authentication user-name-format
mac-address with-hyphen lowercase command to use MAC-based user accounts for MAC
authentication users, and each MAC address must be hyphenated and in lower case..
To configure the AC:
1.
Configure an ISP domain branch.net:
a.
Select Authentication > AAA from the navigation tree.
You are placed on the Domain Setup tab.
b.
Enter the domain name in the Domain Name field.
c.
Click Apply.