Creating an ipv6 static route – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 211
Advertising
190
Figure 160 Displaying the IPv6 active route table
Table 73 Field description
Field Description
Destination IP Address
Destination IP address and prefix length of the IPv6 route.
Prefix Length
Protocol
Protocol that discovered the IPv6 route.
Preference
Preference value for the IPv6 route.
The smaller the number, the higher the preference.
Next Hop
Next hop IP address of the IPv6 route.
Interface
Outgoing interface of the IPv6 route. Packets destined for the
specified network segment will be sent out the interface.
Creating an IPv6 static route
1.
From the navigation tree, select Network > IPv6 Routing.
2.
Click the Create tab.
Advertising
This manual is related to the following products: