H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 650)

629
c. On the page that appears, enter 000f-e215-1515, 000f-e215-1530, and 000f-e213-1235 in
the MAC Address field, and then click Apply.
Figure 671 Adding MAC addresses to the rogue detection rule list
d. Select Attacker, and click Add. Enter 000f-e220-405e in the MAC Address field and click
Apply.
Figure 672 Adding MAC addresses to the attacker list
5. Enable countermeasures against the static rogue device:
a. Select Security > Rogue Detection from the navigation tree.
b. Click the AP Monitor tab, and click Common Set.
c. Select Static Rogue Device. This is because the MAC address of Client 4 is added manually to
the attacker list.
d. Click Apply.