Configuring crypto-type wireless service – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 369
348
Item Description
Multicast Trigger
•
Enable—Enable the multicast trigger function of 802.1X to send
multicast trigger messages to the clients periodically to initiate
authentication. By default, the multicast trigger function is enabled.
•
Disable—Disable the 802.1X multicast trigger function.
IMPORTANT:
For a WLAN, the clients can actively initiate authentication, or the AP
can discover users and trigger authentication. Therefore, the ports do
not need to send 802.1X multicast trigger messages periodically for
initiating authentication. H3C recommends that you disable the
multicast trigger function in a WLAN because the multicast trigger
messages consume bandwidth.
Stateful Failover
•
Enable—Enable 802.1X support for the stateful failover function.
You need to select High Availability > Stateful Failover and
configure the stateful failover function (see "
").
•
Disable—Disable 802.1X support for the stateful failover function.
Whether a device supports the stateful failover function varies with the
device model. For more information, see "
Controllers Web-Based Configuration Guide
MAC Authentication
Select MAC Authentication.
Domain
Select an existing domain from the list.
The default domain is system. To create a domain, select
Authentication > AAA from the navigation tree, click the Domain
Setup tab, and enter a new domain name in the Domain Name field.
•
The selected domain name applies to only the current wireless
service, and all clients accessing the wireless service use this
domain for authentication, authorization, and accounting.
•
Do not delete a domain name in use. Otherwise, the clients that
access the wireless service will be logged out.
Configuring crypto-type wireless service
Configuring basic settings for a crypto-type wireless service
1.
Select Wireless Service > Access Service from the navigation tree.
2.
Click the
icon for the target crypto-type wireless service.