H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 251
Advertising
230
Figure 199 Creating static link aggregation group 1
Method 2: Create a dynamic link aggregation group
1.
From the navigation tree, select Network > Link Aggregation.
2.
Click Create.
3.
Configure dynamic aggregation group 1:
a.
Enter link aggregation interface ID 1.
b.
Select the Dynamic (LACP Enabled) option for aggregate interface type.
c.
Select GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3.
4.
Click Apply.
Figure 200 Creating dynamic link aggregation group 1
Advertising
This manual is related to the following products: