H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 791)

770
Figure 800 Configuring the address of the backup AC
Verifying the configuration
1. When AC 1 operates correctly, view the AP status on AC 1 and AC 2. The AP connection priority
on AC 1 is set to 6 (the higher one), so AC 1 becomes the active AC. The AP establishes a
connection to AC 1 based on priority.
a. On AC 1, select Advanced > AC Backup from the navigation tree.
b. Click the Status tab.
The status information shows that AC 1 is the active AC.
Figure 801 Displaying the AP status on AC 1
c. On AC 2, select Advanced > AC Backup from the navigation tree.
d. Click the Status tab.
The information shows that AC 1 is acting as the standby AC.