H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 181)

160
Recommended configuration procedure
Step Remarks
1. Creating a VLAN Required.
2. Modifying a VLAN Required.
Select either task.
Configure the untagged member ports and tagged member ports
of the VLAN, or remove ports from the VLAN.
3. Modifying a port
Creating a VLAN
1. From the navigation tree, select Network > VLAN.
The system automatically selects the VLAN tab and enters the page, as shown in
Figure 124 .
Figure 124 VLAN configuration page
TIP:
To easily configure a specific range of VLANs, enter a VLAN range in the VLAN Range field and click
Select, and all undesired VLANs will be filtered out. If you click Remove, all VLANs within this range
will be deleted.
2. Click Add to enter the page for creating a VLAN.
3. On the page that appears, enter the ID of the VLAN you want to create.
4. Click Apply.