Switching to fat ap, Configuring wireless location – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 761
Advertising
740
Item Description
Software Version
Enter the software version of the AC in the correct format.
Switching to fat AP
1.
Select Advanced > AP Setup from the navigation tree.
2.
Click the Switch to Fat AP tab.
3.
Select the desired AP.
4.
Click Switch to Fat AP to perform AP working mode switchover.
NOTE:
Before you switch the work mode, you must download the fat AP software to the AP.
Configuring wireless location
1.
Select Advanced > Wireless Location from the navigation tree.
Advertising
This manual is related to the following products: