Setting ap parameters – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 323
Advertising
302
Figure 286 Adding an AP
3.
Create the AP as described in
.
4.
Click Apply.
Table 107 Configuration items
Item Description
AP Name
Set the AP name.
Model AP
model.
Serial ID
Specify the serial ID:
•
Auto—Use the auto serial ID function together with the auto AP function. For more
information about configuring auto AP, see "
•
Manual—Enter an AP serial ID.
By default, Auto is used.
Setting AP parameters
1.
Select AP > AP Setup from the navigation tree.
2.
Click the
icon for the target AP.
Advertising
This manual is related to the following products: