Configuring ac 2 – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 794
Advertising
773
Figure 804 Configuring the AP connection priority for AP 1
Configuring AC 2
1.
Configure AC 2 so that a connection is set up between AC 2 and AP 2.
For more information about configurations, see "
."
2.
Set the AP connection priority to 7.
The configuration steps are the same as the steps on AC 1 (Details not shown.).
3.
Configure AC 3 (the backup AC):
a.
Configure the related information for AP 1 and AP 2.
For more information about configurations, see "
b.
Select AP > AP Setup from the navigation tree.
c.
Click the
icon for the target AP.
d.
Expand Advanced Setup.
e.
Enter 1.1.1.3 in the Backup AC IPv4 Address field.
f.
Click Apply.
Advertising
This manual is related to the following products: