H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 324)

303
Figure 287 AP setup
3. Configure the AP as described in Table 108 .
4. Click Apply.
Table 108 Configuration items
Item Description
AP Name Rename the AP.
Country/Region
Code
Select a country/region code.
By default, no country/region code is configured for an AP, and the global
country/region code applies. If both country/region code and global country/region
code are configured, the AP uses its own country/region code. For how to configure
the global country/region code, see " Configuring advanced settings ."
IMPORTANT:
Some ACs and APs have fixed country/region codes, whichever is used is determined as
follows:
• An AC's fixed country/region code cannot be changed, and all managed APs
whose country/region codes are not fixed must use the AC's fixed country/region
code.
• An AP's fixed country/region code cannot be changed and the AP can only use the
country/region code.
If an AC and a managed AP use different fixed country/region codes, the AP uses its
own fixed country/region code.
Radio Number Select the number of the radios on the AP. The value depends on the AP model.