H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 528)

507
Figure 539 Displaying interference device state
Table 166 Field description
Field Description
Severity Index
Interference severity level in the range of 1 to 100. A greater value indicates a stronger
interference.
Duty Cycle(%) Percentage of time for which the interference device was active.
Signal Strength Signal strength of the detected interference device.
Displaying channel quality information
1. Select Radio > Spectrum Analysis from the navigation tree.
2. Click Channel Quality Info.
Figure 540 Displaying channel quality information
Manual channel adjustment configuration example
Network requirements
As shown in Figure 262 , configure manual channel adjustment on the AC so that the AC can perform
manual channel adjustment when the channel of AP 1 is unavailable.
Figure 541 Network diagram