Verifying the configuration, Network requirements – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 800
779
Figure 812 Setting session-mode load balancing
Verifying the configuration
Client 1 is associated with AP 1, and Client 2 through Client 6 are associated with AP 2. Because the
number of clients associated with AP 1 reaches 5 and the session gap between AP 2 and AP 1 reaches
4, Client 7 is associated with AP 1.
AP-based traffic-mode load balancing configuration example
Network requirements
•
As shown in
, all APs operate in 802.11g mode. Client 1 and Client 2 are associated with
AP 1, and no client is associated with AP 2.
•
Configure traffic-mode load balancing on the AC. The traffic threshold is 3 Mbps, which
corresponds to the threshold value of 10 in percentage, and the traffic gap is 12 Mbps, which
corresponds to the traffic gap value 40 in percentage.