H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 413)

392
Figure 390 Enabling the wireless service
8. Bind an AP radio to the wireless service:
a. Select Wireless Service > Access Service from the navigation tree.
b. Click the icon for the wireless service mac-auth.
c. Select the box of the AP with the radio mode 802.11n(2.4GHz).
d. Click Bind.
Figure 391 Binding an AP radio to a wireless service
9. Enable 802.11n(2.4GHz) radio:
a. Select Radio > Radio from the navigation tree.
b. Select the ap 802.11n(2.4GHz) box of the target AP.
c. Click Enable.