H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 415)

394
Figure 394 Adding service
3. Add an account:
a. Click the User tab.
b. Select User > All Access Users from the navigation tree.
c. Click Add.
d. On the page that appears, enter username 00146c8a43ff, set the account name and
password both to 00146c8a43ff, select the service mac, and click Apply.
Figure 395 Adding account
Configuring the RADIUS server (IMC v5)
The following example uses IMC (IMC PLAT 5.0 and IMC UAM 5.0) to illustrate the basic configuration
of the RADIUS server.
To configure the RADIUS server:
1. Add an access device:
a. Click the Service tab in the IMC platform.
b. Select User Access Manager > Access Device Management from the navigation tree.
c. Click Add.
d. On the page that appears, enter expert as the Shared Key, keep the default values for other
parameters, and select or manually add the access device with the IP address 10.18.1.1, and
click Apply.