Internal server configuration example, Network requirements – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 299
278
Figure 254 Configuring NAT address pool 0
3.
Configure dynamic NAT:
a.
Click Add in the Dynamic NAT area.
The Add Dynamic NAT page appears.
b.
Select Vlan-interface2 for Interface and enter 2001 for ACL.
c.
Select PAT for Address Transfer.
d.
Enter 0 for Address Pool Index.
e.
Click Apply.
Figure 255 Configuring dynamic NAT
Internal server configuration example
Network requirements
As illustrated in
, a company provides two Web servers and one FTP server for external users
to access. The internal network address is 10.110.0.0/16. The internal address for the FTP server is
10.110.10.3/16, for the Web server 1 is 10.110.10.1/16, and for the Web server 2 is 10.110.10.2/16. The
company has three public IP addresses from 202.38.1.1/24 through 202.38.1.3/24. Specifically, the
company has the following requirements: