H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 357)

336
Configuring access service
Recommended configuration procedure
Step Remarks
1. Creating a WLAN service Required.
2. Configuring wireless service:
Configuring clear-type wireless service
Configuring crypto-type wireless service
Required.
Use either method.
Complete the security settings as needed.
3. Configuring an authentication mode Optional.
4. Enabling a wireless service Required.
5. Binding an AP radio to a wireless service Required.
6. Enabling a radio Required.
7. Displaying detailed information about a wireless
service
Optional.
Creating a WLAN service
1. Select Wireless Service > Access Service from the navigation tree.
Figure 328 Configuring access service
2. Click Add.
Figure 329 Creating a wireless service
3. Configure the wireless service as described in Table 119 .
4. Click Apply.