H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 839)

818
3. Configure RADIUS scheme system:
a. Select Authentication > RADIUS from the navigation tree.
b. Click Add.
The RADIUS scheme configuration page appears.
c. Enter system for Scheme Name, select Extended for Server Type, and select Without domain
name for Username Format.
d. Click Add in the RADIUS Server Configuration field.
The Add RADIUS Server page appears.
e. Select Primary Authentication for Server Type, specify an IPv4 address 8.1.1.16 and 1812 as
the port number.
f. Enter expert for Key and expert for Confirm Key.
g. Click Apply.
Figure 870 Configuring a primary RADIUS authentication server
h. Click Add in the RADIUS Server Configuration field.
The Add RADIUS Server page appears.
i. Select Primary Accounting for Server Type, and specify an IPv4 address 8.1.1.16 and 1813 as
the port number.
j. Enter expert for Key and expert for Confirm Key.
k. Click Apply.
Figure 871 Configuring a RADIUS accounting server