H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 247)

226
Field Description
Member Port Member ports of the aggregate interface.
State
Selected states of the member ports:
• Selected.
• Unselected.
Reason for being Unselected
Reason why the state of a member port is Unselected. For a selected member
port, this field displays a hyphen (-).
Setting LACP priority
1. From the navigation tree, select Network > LACP.
2. Click Setup.
Figure 196 Setup tab
3. In the Set LACP enabled port(s) parameters area, set the port priority, and select the desired ports.
4. Click Apply in the area.
Table 87 Configuration items
Item Description
Port Priority Set the LACP priority.
Select port(s) to
apply Port Priority Select the ports for which you want to set the LACP priority.
You can set the LACP priority for both LACP-enabled ports and LACP-disabled ports.