H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 504)

483
Enabling a radio
1. Select Radio > Radio from the navigation tree.
Figure 522 Enabling radio
2. Select the box of the target radio.
3. Click Enable.
Locking the channel
1. Select Radio > Radio from the navigation tree.
Figure 523 Locking a channel
2. Select the box of the target radio.
3. Click Lock Channel.
Channel locking takes effect only when the AC adopts the auto mode. For more information
about automatic channel adjustment, see "
Configuring radio parameters ."
If you enable channel locking and then enable the radio, the AC automatically selects an
optimal channel, and then locks the channel.
When the AC detects any radar signals, it immediately selects another channel even if the
current channel is locked, and then locks the new channel.