H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 223)

202
Item Description
DNS Server Address
Enter the DNS server addresses for the client.
To allow the client to access a host on the Internet through DNS, you need to specify
a DNS server address.
Up to eight DNS servers can be specified in a DHCP address pool, separated by
commas.
WINS Server Address
Enter the WINS server addresses for the client.
If b-node is specified for the client, you do not need to specify any WINS server
address.
Up to eight WINS servers can be specified in a DHCP address pool, separated by
commas.
NetBIOS Node Type Select the NetBIOS node type for the client.
Creating a dynamic address pool for the DHCP server
1. From the navigation tree, select Network > DHCP.
The default DHCP Server page appears, as shown in
Figure 168 .
2. In the Address Pool area, select the Dynamic option to view all dynamic address pools.
3. Click Add.
Figure 170 Creating a dynamic address pool
4. Configure the dynamic address pool, as described in Table 76 .
5. Click Apply.
Table 76 Configuration items
Item Description
IP Pool Name Enter the name of a dynamic address pool.